Search results for: 'cover plate'

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Pet Rider Seat Cover
As Seen on TV
Width: 56 inches
Length: 56 inches
Hair and Stain Resistant
Built in Slots for Seat Belt Restraints
Headrest Fasteners Keep Seat Cover in Place
Washing Machine Safe

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Dimensions: 7.87"H x 4.875"W x7.25"D Packaged

Shipping Weight: 0.62 lbs Packaged

Color: Black/Orange

Max Capacity: up to 30 lbs (drywall/stud)

2 Tornado fasteners to install into wall included

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Includes:

5- 120VAC illuminated switches

1 -  switch plate with raised mounting bezel, Labeled Fresh, Gray & Black

15 - quick slide female connectors,

4 - mounting plate screws

2 - blanks (to cover switch cutouts if all 5 switches are not used)

Each switch is rated for 20 Amps

Includes:

5- 13.5VDC illuminated switches,
1 - labeled (Fresh, Gray, Black) 5 gang switch plate with raised mounting bezel
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
1 - switch plate labeled 'Gate Valve Heater'
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum 

Model: SA:TNM630277BFKWY
Summit Professional Series
24" Wide Slide-in Gas Range
Height: 44 inches
Width: 24 inches
Depth: 24 inches
4 Sealed 9000 BTU Burners
Slide-in Look w/ Stainless Steel Backguard w/ Digital Clock and Timer
Electronic Ignition
Large 2.92 cu. ft. Oven w/ Glass Door and Interior LIght
Stainless Steel Door Fronts and Kickplate
Black Cabinet
Professional Curved Towel Bar Style Handles
Black Porcelain Cooktop w/ Stainless Steel Manifold
Lower Drop Down Broiler Compartment
RVIA & CSA Certified
Made in America

Chome Finish.

1 1/4 inch pipe

Deck Plate: 66mm

Cover Diameter: 62mm

Material: Brass

Less Overflow

OEM 40 Gallon Max. (151 Liters)
13.5VDC
Size: 7.25" x 26" (18.4 x 66cm)
Amperage Draw: 8 Amps

Made in the USA

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Polished Nickel Finish.

With Push Rod.

1 1/4 inch pipe

Deck Plate: 66mm

Material: Brass

Less Overflow

Input voltage: DC 12/24

Output current per switch:  20A @ 12VDC, 10A @ 24VDC

Max. Power:  240W

Aluminum Plate Panel

Waterproof Rate: IP65

Voltage Range: 6-30V

4 Screws included

Model:SIMU:OJ-106T
LED Illuminated 8" Square Rain Shower Head
Diameter: 8 Inches (20.32 cm)
Height: 2.76 Inches (7.01cm)
Weight: 1.4 lbs (.635 kg)
Take showering to a different level by adding this 8" square LED rain shower head.The LEDs are powered by water and do not require batteries or an external power source.This rain shower has a built in sensor that monitors the temperature of the water.When the water temperature is below 88c F, the LEDs will turn blue,between 89c F and 100c F green, between 101c F and 113c F red and over 114c F the shower LEDs will flash red - warning that the water is hot.

Model:SIMU:OJ-104S
LED Illuminated Handheld Shower
Length: 8.54 Inches (21.69 cm)
Width: 3.31 Inches (8.41 cm)
Height: 1.81 Inches (4.60 cm)
Weight: .4 lb (.181 kg)
Change your showering experience by adding this LED handheld shower.The LEDs are powered by water and require no batteries or external power source.A quick and easy way to transform ordinary shower water into a beautiful waterfall of light.This handheld shower gradually changes through seven colors: white, yellow, orange, red, purple, blue and green.The chrome plated design provides a clean and classic look that compliments most bathrooms.

Model:SIMU:OS-104E
LED Illuminated Mini Shower Head
Diameter: 4.45 Inches (11.3 cm)
Height: 3.54 Inches (8.99 cm)
Weight:.4 lb (.181 kg)
Change your showering experience by adding this LED mini shower head.The LEDs are powered by water and require no batteries or external power source.A quick and easy way to transform ordinary shower water into a beautiful waterfall of light. The chrome plated design provides a clean and classic look that compliments most bathrooms.

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

3- 13.5VDC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4  -mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1- 120 VAC illuminated switch
2 - Labeled switch plates
(1-Tank, 1-Pipe/Elbow)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2  -mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum