Search results for: '16' deluxe pole holder'

Model:PNH:16-Deluxe-FPK
22' Heavy Duty Telescoping Fiberglass Flagpole
Height Closed: 48 inches (121.92 cm)
Diameter: 1.5 inches (3.81 cm)
Weight: 3.35 pounds (1.52 kg)

Model:PNH:22-Deluxe-FPK
22' Heavy Duty Telescoping Fiberglass Flagpole
Height Closed: 48 inches (121.92 cm)
Diameter: 2 inches (5.08 cm)
Weight: 3.35 pounds (1.52 kg)

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Kit includes:

3 foot of 8 gauge positive power lead with connection terminal.

Assortment of standard auto blade fuses

Cover and label assortment

4 mounting wood screws

Kit includes:

3 foot of 8 gauge positive power lead with connection terminal.

Assortment of standard auto blade fuses

Cover and label assortment

4 mounting wood screws 

• Mounts to any handlebar
• Suiable for all kinds of bicycles, golf carts, motorcycles, scooters
• All aluminum alloy constructionWon’t block camera or buttons
• Rotates 360°
• Won't block camera or buttons
• Phone locks in, resistance to blow

Model:PNH:BM-16-WH219
Bumper Mount for 16' Fiberglass Flagpole
Height: 20 inches (50.8 cm)
Diameter: 2 inches (5.08 cm)
Weight: 2.45 pounds (1.11 kg)
Fits on any 4 inch rear bumper. Designed for the 16e heavy-duty fiberglass flag pole. Can also be used on the front of a pull trailer with a 4" channel frame. Made in USA

Model: FB:106105
1.5 Inch Diameter Flagpole Mount
Black Ops Color
Pkg Height: 10 inches (25.4 cm)
Pkg Length: 12 inches (30.48 cm)
Pkg Width: 3.25 inches (8.26 cm)
Weight: 1.3 pounds ( .589 kg)

Made in the USA.

Model: SA:TNM630277BFKWY
Summit Professional Series
24" Wide Slide-in Gas Range
Height: 44 inches
Width: 24 inches
Depth: 24 inches
4 Sealed 9000 BTU Burners
Slide-in Look w/ Stainless Steel Backguard w/ Digital Clock and Timer
Electronic Ignition
Large 2.92 cu. ft. Oven w/ Glass Door and Interior LIght
Stainless Steel Door Fronts and Kickplate
Black Cabinet
Professional Curved Towel Bar Style Handles
Black Porcelain Cooktop w/ Stainless Steel Manifold
Lower Drop Down Broiler Compartment
RVIA & CSA Certified
Made in America

Designed to be used as a master control system with conjunction with UltraHeat® heat panels and anti-freezing systems.

Sensor electronically monitors the outside ambient temperature, activates the system when temperatures fall to 35°F (1.6°C), shuts down the system when temperatures rise to 45°F (7.2°C)

Electronic Sensor operates on 13.5 VDC. Relay coil is 13.5 VDC, Relay Contacts within are either AC or DC rated at 30A @120/277 VAC or 20A @ 28 VDC

DPST means Double Pole, Single Throw indicating basically two independent contact switches either 'on' or 'off' in unison with in the relay.

Model: FB:106755Y
Yellow Solar Beacon Light
1/2 inch Thread Size
Height: 6 inches (15.24 cm)
Diameter: 3.75 inches (9.52 cm)
Weight: 8 ounces (.227 kg)
Flashing Solar Beacon Lights make finding your camp site a breeze and they're easy to install.These lights have a built-in solar panel so there are no batteries or wires to deal with during installlation.Solar beacon lights operate from dusk to dawn - charging during the day and flashing all night. Available in a variety of colors.

Model:PNH:TM-22-WH22
White Tire Mount for 22' Fiberglass Flagpole
Length: 30.25 inches (76.84 cm)
Base Width: 3 inches (7.62 cm)
Tube Height:14 inches (35.56 cm)
Diameter: 2 inches (5.08 cm)
Weight: 5 pounds (2.27 kg)
This unique mount can be used on virtually any vehicle tire. Comes with a black shiny powder coat finish. Simply place the mount on the ground and drive up on it. Thates all it takes! No tools required. Can also be used under trailer stabilizing or tongue jacks. This mount is designed for the 22e heavy-duty fiberglass flag pole. Made in America.

Model:PNH:BM-22-WH7
Bumper Mount for 22' Fiberglass Flagpole
Height: 20 inches (50.8 cm)
Diameter: 2 inches (5.08 cm)
Weight: 2.45 pounds (1.11 kg)
Fits on any 4 inch rear bumper. Designed for the 22e heavy-duty fiberglass flag pole. Can also be used on the front of a pull trailer with a 4" channel frame. Made in USA

Model: AN:153500
4" x 6" Empire Brand Flags
Height: 4 inches (10.16 cm)
Length: 6 inches (15.24 cm)
Weight: 1 pound (2.27 kg)

The Flags of the 50 States set is a complete set of 4" x 6" Rayon flags that are mounted to 10" black plastic poles with gold colored gilt spears. These miniature replica flags are made to the highest quality available and it shows in their rich and vibrant colors. This set makes a great addition to any classroom, boardroom, office or home. Flags are shown mounted on an elegant black wooden base - sold separately.

Model: AN:Mexico
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:Indiana
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:California
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

For Standard RV  holding tanks up to 55 Gallon (208.2 Liters)

120 VAC
Size:12" X 20" (30.5cm x 51cm)
Amperage Draw:1.37 Amps
Wattage: 164.4 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.