Search results for: 'head/ hand shower kit'

Low Profile 11-18 VDC, 3 Watt Light Fixture

Total of 24 SMD LEDs

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile, 11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K,  Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 6.5LFT (1.98M)

Maximum of 6 Amps of total draw at full length

All metal construction for durability

Concealed screw installation

Mounting hardware included

Superior mounting posts

Pfister Pforever Warranty® covers finish and function for life

Holds up to 10 lbs

Coordinating Pasadena family bath products available

Concealed screw design allows for a clean look when installed

Model:GP-SF-15
SUNfilm 15 Watt Solar Panel
Length: 36 Inches (91.44 cm)
Width: 12.25 Inches (31.12 cm)
Depth: .5 Inches (1.27 cm)
Weight: 6.6 lbs (2.99 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 15 delivers up to 900mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model:GP-SF-1.5
SUNfilm 1.5 Watt Solar Panel
Length: 14.5 Inches (36.83 cm)
Width: 6.5 Inches (16.51 cm)
Depth: .5 Inches (1.27 cm)
Weight: 2 lbs (.91 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 1.5 delivers up to 120mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0125
Housing Channel Alignment Connectors - Linear
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0124
Housing Channel Alignment Connectors - 90 Degree Flat Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0123
Housing Channel Alignment Connectors - 90 Degree Interior/Exterior Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

GP-300
Modified Sine Wave Inverter
300 Watts -12 volt
Length: 9.5 Inches (24.13 cm)
Width: 8.5 Inches (21.59 cm)
Height: 1.8 Inches (4.57 cm)
Weight: 1.8 lbs (.82 kg)
Go Power! 300-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 300-Watt of continues AC power. This inverter comes with two outlets and can be hooked up to the battery through the car utility adapter / cigarette lighter adapter. It can surge to 400-Watt as well as contains all instructions.

GP-175
Modified Sine Wave Inverter
175 Watts -12 volt
Length: 8.1 Inches (20.57 cm)
Width: 7.2 Inches (18.29 cm)
Height: 2.1 Inches (5.33 cm)
Weight: 1.11 lbs (.50 kg)
Go Power! 175-Watt Modified Sine Wave Inverter takes in 12 volt DC power and converts it to AC household power to run loads up to 175 watts of continuous AC power. The GP-175 can connect to the car utility adaptor / cigarette lighter adaptor for DC power and plug in AC device to the one AC outlet on the GP-175. The GP-175 can surge to 210 watts and all instructions is provided.

When you need replacement switches

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

120 VAC Built-in LED for 'ON' Indicator

UltraHeat 13.5 VDC Replacement Lighted Switches.

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

13.5 VDC Built-in LED for 'ON' Indicator.

Includes:

3- 13.5VDC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4  -mounting plate screws

Each switch is rated for 20 Amps maximum.

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC
Length: 12" (30.5cm),
Amperage Draw: 2.3 Amps

To be used only with a ridge half inch supply line (PEX style). Do not use on a vinyl or vinyl reinforced supply line, this type of supply line will not accept the heat output.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter (7.6cm) RV drain pipe

Heater Length: 18" (45.7cm),

13.5VDC

Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

 

For a 3" diameter (7.6cm) RV drain pipe
Length: 12" (30.5cm)

13.5VDC
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

Length: 18" (45.7cm)

13.5VDC
Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

13.5VDC
Length: 12" (30.5cm),
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

LIFETIME Limited Warranty

Made in the USA

For Standard RV Holding Tanks up to 75 Gal. ( 284 Liters)

120VAC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw:1.68 Amps
Wattage: 201.6 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV  holding tanks up to 55 Gallon (208.2 Liters)

120 VAC
Size:12" X 20" (30.5cm x 51cm)
Amperage Draw:1.37 Amps
Wattage: 164.4 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 40 Gal. (151 Liters)

13.5VDC & 120VAC (Dual Voltage, Dual Element)
Size:12" x 24" (30.5cm x 61cm)

Amperage Draw - Low voltage side: 9.0 Amps @ 13.5 VDC
Wattage: 121.5 watts
Amperage Draw - High voltage side: 0.94 Amps @ 120 VAC
Wattage: 112.8watts

120 VAC power cord is 15' (4.5M) long

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks  up to 75 Gal. ( 284 Liters)
13.5VDC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw: 11.8 Amps
Wattage: 159.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 55 Gal. (208.2 Liters)
13.5VDC
Size:12" x 20" (30.5cm x 50.8cm)
Amperage Draw: 9.9 Amps
Wattage: 133.7 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to  25 Gal. (95L)
13.5VDC
Size: 7 1/4" x 12" (18.4cm x 30.5cm)
Amperage Draw: 4.1 Amps)
Wattage: 55.35 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA