Search results for: 'Shower+faucet+cartridge'

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

GP-1000
Modified Sine Wave Inverter
1000 Watts -12 volt
Length: 13.5 Inches (34.29 cm)
Width: 12 Inches (30.48 cm)
Height: 3.5 Inches (8.89 cm)
Weight: 4.2 lbs (1.91 kg)
Go Power! 1000-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 1000-Watt of continuous power. This inverter comes with two AC outlets and can be hooked up to the batteries using GP-DC-KIT2 and can surge to 1300-Watt as well as contains all instructions.

GP-300
Modified Sine Wave Inverter
300 Watts -12 volt
Length: 9.5 Inches (24.13 cm)
Width: 8.5 Inches (21.59 cm)
Height: 1.8 Inches (4.57 cm)
Weight: 1.8 lbs (.82 kg)
Go Power! 300-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 300-Watt of continues AC power. This inverter comes with two outlets and can be hooked up to the battery through the car utility adapter / cigarette lighter adapter. It can surge to 400-Watt as well as contains all instructions.

GP-175
Modified Sine Wave Inverter
175 Watts -12 volt
Length: 8.1 Inches (20.57 cm)
Width: 7.2 Inches (18.29 cm)
Height: 2.1 Inches (5.33 cm)
Weight: 1.11 lbs (.50 kg)
Go Power! 175-Watt Modified Sine Wave Inverter takes in 12 volt DC power and converts it to AC household power to run loads up to 175 watts of continuous AC power. The GP-175 can connect to the car utility adaptor / cigarette lighter adaptor for DC power and plug in AC device to the one AC outlet on the GP-175. The GP-175 can surge to 210 watts and all instructions is provided.

When you need replacement switches

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

120 VAC Built-in LED for 'ON' Indicator

UltraHeat 13.5 VDC Replacement Lighted Switches.

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

13.5 VDC Built-in LED for 'ON' Indicator.

To be wired in parallel with other relay coils within the Master Control Circuit  

Coil - 12VDC

Contacts - 30A @ 120/277 VAC

                    20A @ 28 VDC (low voltage)

Designed to be used as a master control system with conjunction with UltraHeat® heat panels and anti-freezing systems.

Sensor electronically monitors the outside ambient temperature, activates the system when temperatures fall to 35°F (1.6°C), shuts down the system when temperatures rise to 45°F (7.2°C)

Electronic Sensor operates on 13.5 VDC. Relay coil is 13.5 VDC, Relay Contacts within are either AC or DC rated at 30A @120/277 VAC or 20A @ 28 VDC

DPST means Double Pole, Single Throw indicating basically two independent contact switches either 'on' or 'off' in unison with in the relay.

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Includes:

5- 120VAC illuminated switches

1 -  switch plate with raised mounting bezel, Labeled Fresh, Gray & Black

15 - quick slide female connectors,

4 - mounting plate screws

2 - blanks (to cover switch cutouts if all 5 switches are not used)

Each switch is rated for 20 Amps

Includes:

5- 13.5VDC illuminated switches,
1 - labeled (Fresh, Gray, Black) 5 gang switch plate with raised mounting bezel
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

3- 13.5VDC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4  -mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1- 120 VAC illuminated switch
2 - Labeled switch plates
(1-Tank, 1-Pipe/Elbow)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2  -mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
1 - switch plate labeled 'Gate Valve Heater'
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC
Length: 12" (30.5cm),
Amperage Draw: 2.3 Amps

To be used only with a ridge half inch supply line (PEX style). Do not use on a vinyl or vinyl reinforced supply line, this type of supply line will not accept the heat output.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter (7.6cm) RV drain pipe

Heater Length: 18" (45.7cm),

13.5VDC

Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

 

For a 3" diameter (7.6cm) RV drain pipe
Length: 12" (30.5cm)

13.5VDC
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

Length: 18" (45.7cm)

13.5VDC
Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

13.5VDC
Length: 12" (30.5cm),
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

LIFETIME Limited Warranty

Made in the USA

For Standard RV Holding Tanks up to 75 Gal. ( 284 Liters)

120VAC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw:1.68 Amps
Wattage: 201.6 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV  holding tanks up to 55 Gallon (208.2 Liters)

120 VAC
Size:12" X 20" (30.5cm x 51cm)
Amperage Draw:1.37 Amps
Wattage: 164.4 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 40 Gal. (151 Liters)

13.5VDC & 120VAC (Dual Voltage, Dual Element)
Size:12" x 24" (30.5cm x 61cm)

Amperage Draw - Low voltage side: 9.0 Amps @ 13.5 VDC
Wattage: 121.5 watts
Amperage Draw - High voltage side: 0.94 Amps @ 120 VAC
Wattage: 112.8watts

120 VAC power cord is 15' (4.5M) long

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks  up to 75 Gal. ( 284 Liters)
13.5VDC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw: 11.8 Amps
Wattage: 159.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 55 Gal. (208.2 Liters)
13.5VDC
Size:12" x 20" (30.5cm x 50.8cm)
Amperage Draw: 9.9 Amps
Wattage: 133.7 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to  25 Gal. (95L)
13.5VDC
Size: 7 1/4" x 12" (18.4cm x 30.5cm)
Amperage Draw: 4.1 Amps)
Wattage: 55.35 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 1.5" diameter  (3.8cm) pipe gate valve

13.5 VDC,
 2.5 Amp Draw.
Wattage: 33.8 watts

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself. 

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter  (7.6cm) RV drain pipe

13.5VDC
Size: 13" x 3"  (33 x 7.6 cm)
Amperage Draw: 1.8 Amps
Wattage: 24.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter  (3.8 cm) RV drain pipe

13.5VDC
Size: 8" x 3" (20.3 x 7.6 cm)
Amperage Draw: 0.9 Amps
Wattage: 12.15 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Model: Jolly Roger AN:379375
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
100% Heavyweight SolarGuard Nylon. Features strong duck heading and two large brass grommets. Durable and fast drying.3/4

Model: AN:601750-9F
9" Alluminum Eagle Flagpole Ornament
Height: 7.5 inches (19.05 cm)
Wingspan Width:9 inches (22.86 cm)
Depth: 4.5 inches (11.43 cm)
Weight: 1.25 (.57 kg)
This outdoor aluminum eagle flagpole ornament is ideal for flagpoles 20-35 feet in height.Made of tough aluminum casting with a durable gold finish for many years of enjoyment.