Search results for: 'PANEL shower'

Holds up to 10 lbs

Coordinating Pasadena family bath products available

Concealed screw design allows for a clean look when installed

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.

Model: BP:LT0126-06
Decorative Trim - Oceana Winchester Brass
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0126-RB
Decorative Trim - Oceana Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0126-SS
Decorative Trim - Oceana Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-06
Decorative Trim - Diamond Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-RB
Decorative Trim - Diamond Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-SS
Decorative Trim - Diamond Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-14
Decorative Trim - Diamond Bright Nickel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-06
Decorative Trim - Aurora Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-RB
Decorative Trim - Aurora Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-SS
Decorative Trim - Aurora Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-14
Decorative Trim - Aurora Bright Nickel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0125
Housing Channel Alignment Connectors - Linear
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0124
Housing Channel Alignment Connectors - 90 Degree Flat Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0123
Housing Channel Alignment Connectors - 90 Degree Interior/Exterior Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

GP-1000
Modified Sine Wave Inverter
1000 Watts -12 volt
Length: 13.5 Inches (34.29 cm)
Width: 12 Inches (30.48 cm)
Height: 3.5 Inches (8.89 cm)
Weight: 4.2 lbs (1.91 kg)
Go Power! 1000-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 1000-Watt of continuous power. This inverter comes with two AC outlets and can be hooked up to the batteries using GP-DC-KIT2 and can surge to 1300-Watt as well as contains all instructions.

GP-300
Modified Sine Wave Inverter
300 Watts -12 volt
Length: 9.5 Inches (24.13 cm)
Width: 8.5 Inches (21.59 cm)
Height: 1.8 Inches (4.57 cm)
Weight: 1.8 lbs (.82 kg)
Go Power! 300-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 300-Watt of continues AC power. This inverter comes with two outlets and can be hooked up to the battery through the car utility adapter / cigarette lighter adapter. It can surge to 400-Watt as well as contains all instructions.

GP-175
Modified Sine Wave Inverter
175 Watts -12 volt
Length: 8.1 Inches (20.57 cm)
Width: 7.2 Inches (18.29 cm)
Height: 2.1 Inches (5.33 cm)
Weight: 1.11 lbs (.50 kg)
Go Power! 175-Watt Modified Sine Wave Inverter takes in 12 volt DC power and converts it to AC household power to run loads up to 175 watts of continuous AC power. The GP-175 can connect to the car utility adaptor / cigarette lighter adaptor for DC power and plug in AC device to the one AC outlet on the GP-175. The GP-175 can surge to 210 watts and all instructions is provided.

When you need replacement switches

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

120 VAC Built-in LED for 'ON' Indicator

UltraHeat 13.5 VDC Replacement Lighted Switches.

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

13.5 VDC Built-in LED for 'ON' Indicator.

Includes:

5- 120VAC illuminated switches

1 -  switch plate with raised mounting bezel, Labeled Fresh, Gray & Black

15 - quick slide female connectors,

4 - mounting plate screws

2 - blanks (to cover switch cutouts if all 5 switches are not used)

Each switch is rated for 20 Amps

Includes:

5- 13.5VDC illuminated switches,
1 - labeled (Fresh, Gray, Black) 5 gang switch plate with raised mounting bezel
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

3- 13.5VDC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4  -mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1- 120 VAC illuminated switch
2 - Labeled switch plates
(1-Tank, 1-Pipe/Elbow)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2  -mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum