Search results for: 'shower+set'

Modern Single Lever Design

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing, exceeding the industry durability standard.

cUPC certified

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass construction

Square Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Brass Cartridge

Easy to install

90° swiveling spout

For either cold or hot water, Red/Blue indicators included

Kit includes:

3 foot of 8 gauge positive power lead with connection terminal.

Assortment of standard auto blade fuses

Cover and label assortment

4 mounting wood screws

Kit includes:

3 foot of 8 gauge positive power lead with connection terminal.

Assortment of standard auto blade fuses

Cover and label assortment

4 mounting wood screws 

This is a handy peel-n-stick pouch organizer that you can place anywhere!

Dimensions:    8" x 3 3/4"

This wire is the same wire used by the RV Manufactures in 12 Volt DC circuits.

This is the wire we recommend, its colors match the UltraHeat power leads for ease in wiring connections,  and also meets the minimum gauge wire requirements when used with the UltraHeat switch kits.  

This wire is the same wire used by the RV Manufactures in 12 Volt DC circuits.

This is the wire we recommend, its colors match the UltraHeat power leads for ease in wiring connections,  and also meets the minimum gauge wire requirements when used with the UltraHeat switch kits. 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 6.5LFT (1.98M)

Maximum of 6 Amps of total draw at full length

Model:GP-SF-15
SUNfilm 15 Watt Solar Panel
Length: 36 Inches (91.44 cm)
Width: 12.25 Inches (31.12 cm)
Depth: .5 Inches (1.27 cm)
Weight: 6.6 lbs (2.99 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 15 delivers up to 900mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model:GP-SF-1.5
SUNfilm 1.5 Watt Solar Panel
Length: 14.5 Inches (36.83 cm)
Width: 6.5 Inches (16.51 cm)
Depth: .5 Inches (1.27 cm)
Weight: 2 lbs (.91 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 1.5 delivers up to 120mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model:GP-FLEX-200
200 Watt Flexible Solar Kit
Length: 41.7Inches (105.92 cm)
Width: 21.3 Inches (54.1 cm)
Depth: .1 Inches (.25 cm)
Weight: 5.8 lbs (2.64 kg)
The Go Power! Solar Flex panels are aerodynamic and DURABLE - a virtually unbreakable solar battery charger for RVs, boats and long-haul trucks. These solar panels are designed to provide a powerful charging solution for batteries and conform to almost any surface. Unlike other "flexible" products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flexible panel on the market.
An impermeable lamination coats the entire module, allowing it to contour and flex against curved areas, eliminating any need for custom mounts. The panel can be affixed by adhesive or screw mounting options and grommets are an added bonus for ease-of-installation. The thin, lightweight module can also be sewn into canvas, making it a truly versatile solar module.

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.

Model: BP:LT0126-06
Decorative Trim - Oceana Winchester Brass
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0126-RB
Decorative Trim - Oceana Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0126-SS
Decorative Trim - Oceana Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-06
Decorative Trim - Aurora Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-RB
Decorative Trim - Aurora Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-SS
Decorative Trim - Aurora Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-14
Decorative Trim - Aurora Bright Nickel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0125
Housing Channel Alignment Connectors - Linear
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0124
Housing Channel Alignment Connectors - 90 Degree Flat Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0123
Housing Channel Alignment Connectors - 90 Degree Interior/Exterior Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.