Search results for: '13.5VDC+3.5+Amps'

Input voltage: DC 12/24

Output current per switch:  20A @ 12VDC, 10A @ 24VDC

Max. Power:  240W

Aluminum Plate Panel

Waterproof Rate: IP65

Voltage Range: 6-30V

4 Screws included

• Mounts to any handlebar
• Suiable for all kinds of bicycles, golf carts, motorcycles, scooters
• All aluminum alloy constructionWon’t block camera or buttons
• Rotates 360°
• Won't block camera or buttons
• Phone locks in, resistance to blow

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Designed to be used as a master control system with conjunction with UltraHeat® heat panels and anti-freezing systems.

Sensor electronically monitors the outside ambient temperature, activates the system when temperatures fall to 35°F (1.6°C), shuts down the system when temperatures rise to 45°F (7.2°C)

Electronic Sensor operates on 13.5 VDC. Relay coil is 13.5 VDC, Relay Contacts within are either AC or DC rated at 30A @120/277 VAC or 20A @ 28 VDC

DPST means Double Pole, Single Throw indicating basically two independent contact switches either 'on' or 'off' in unison with in the relay.

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Model: Black and White Checkered PNH:BW-Checkered-35
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
These 3'x5' flags are made from polyester for the outdoors. Comes complete with eye holes for hanging and is light weight for heavy coastal and desert winds.

Model: Prisoner of War PNH:POW-32
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
These 3'x5' flags are made from polyester for the outdoors. Comes complete with eye holes for hanging and is light weight for heavy coastal and desert winds.

Model: Classic Pirate PNH:Pirate-36
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
These 3'x5' flags are made from polyester for the outdoors. Comes complete with eye holes for hanging and is light weight for heavy coastal and desert winds.

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Model: Annin Nyl-Glo Welcome Home Our Heroes AN:439200
3' x 5' USA Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 12.8 ounces (.363 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 5 feet Welcome Home Our Heroes flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Model: Annin Nyl-Glo We Support Our Troops AN:929037
3' x 5' We Support Our Troops Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 12.8 ounces (.363 kg)
Nylon-Glo we support our troops flag. May They Return Soon flag with yellow ribbon. This yellow ribbon is a traditional symbol of support for those service men and women who serve our country in foreign lands, and this bright Nylon-Glo flag will proudly display your support until the day that they return home.Made in the USA.