Search results for: 'Z-25N60-th'

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Model:SIMU:OJ-104S
LED Illuminated Handheld Shower
Length: 8.54 Inches (21.69 cm)
Width: 3.31 Inches (8.41 cm)
Height: 1.81 Inches (4.60 cm)
Weight: .4 lb (.181 kg)
Change your showering experience by adding this LED handheld shower.The LEDs are powered by water and require no batteries or external power source.A quick and easy way to transform ordinary shower water into a beautiful waterfall of light.This handheld shower gradually changes through seven colors: white, yellow, orange, red, purple, blue and green.The chrome plated design provides a clean and classic look that compliments most bathrooms.

Model: BP:LT0137-06
Decorative Trim - Diamond Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-RB
Decorative Trim - Diamond Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-SS
Decorative Trim - Diamond Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-14
Decorative Trim - Diamond Bright Nickel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-06
Decorative Trim - Aurora Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-RB
Decorative Trim - Aurora Refined Bronze (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-SS
Decorative Trim - Aurora Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-14
Decorative Trim - Aurora Bright Nickel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0125
Housing Channel Alignment Connectors - Linear
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0124
Housing Channel Alignment Connectors - 90 Degree Flat Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0123
Housing Channel Alignment Connectors - 90 Degree Interior/Exterior Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

GP-300
Modified Sine Wave Inverter
300 Watts -12 volt
Length: 9.5 Inches (24.13 cm)
Width: 8.5 Inches (21.59 cm)
Height: 1.8 Inches (4.57 cm)
Weight: 1.8 lbs (.82 kg)
Go Power! 300-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 300-Watt of continues AC power. This inverter comes with two outlets and can be hooked up to the battery through the car utility adapter / cigarette lighter adapter. It can surge to 400-Watt as well as contains all instructions.

To be wired in parallel with other relay coils within the Master Control Circuit  

Coil - 12VDC

Contacts - 30A @ 120/277 VAC

                    20A @ 28 VDC (low voltage)

Designed to be used as a master control system with conjunction with UltraHeat® heat panels and anti-freezing systems.

Sensor electronically monitors the outside ambient temperature, activates the system when temperatures fall to 35°F (1.6°C), shuts down the system when temperatures rise to 45°F (7.2°C)

Electronic Sensor operates on 13.5 VDC. Relay coil is 13.5 VDC, Relay Contacts within are either AC or DC rated at 30A @120/277 VAC or 20A @ 28 VDC

DPST means Double Pole, Single Throw indicating basically two independent contact switches either 'on' or 'off' in unison with in the relay.

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 1.5" diameter  (3.8cm) pipe gate valve

13.5 VDC,
 2.5 Amp Draw.
Wattage: 33.8 watts

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself. 

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Model: FB:JollyRoger-RB
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
These 3'x5' flags are made from polyester for the outdoors. Comes complete with eye holes for hanging and is light weight for heavy coastal and desert winds.

Model: FB:BreastCancer-PR
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
These 3'x5' flags are made from polyester for the outdoors. Comes complete with eye holes for hanging and is light weight for heavy coastal and desert winds.

Model: FB:106755Y
Yellow Solar Beacon Light
1/2 inch Thread Size
Height: 6 inches (15.24 cm)
Diameter: 3.75 inches (9.52 cm)
Weight: 8 ounces (.227 kg)
Flashing Solar Beacon Lights make finding your camp site a breeze and they're easy to install.These lights have a built-in solar panel so there are no batteries or wires to deal with during installlation.Solar beacon lights operate from dusk to dawn - charging during the day and flashing all night. Available in a variety of colors.

Model: FB:106105
1.5 Inch Diameter Flagpole Mount
Black Ops Color
Pkg Height: 10 inches (25.4 cm)
Pkg Length: 12 inches (30.48 cm)
Pkg Width: 3.25 inches (8.26 cm)
Weight: 1.3 pounds ( .589 kg)

Made in the USA.

Model: Washington Nationals PNH:Nationals-241
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Chicago White Sox PNH:WhiteSox-401
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Toronto Blue Jays PNH:BlueJays-340
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Philadelphia Phillies PNH:Phillies-348
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: New York Mets PNH:Mets-342
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Arizona Diamondbacks PNH:Diamondbacks-343
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Oakland Athletics PNH:Athletics-251
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Cincinnati Reds PNH:Reds-245
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Texas Rangers PNH:Rangers-345
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.

Model: Chicago Cubs PNH:Cubs-246
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 3.2 ounces (.091 kg)
Officially licensed 3' x 5' flag with attached D-rings. The imprint is 100% show through to the backside with a long lasting color-fast die. Fly on a flagpole or hang it on a wall. Flags come poly-bagged with header and graphic displayed. Made in USA.