Search results for: 'KIT-GR54702432-BG'

Model:GP-FLEX-200
200 Watt Flexible Solar Kit
Length: 41.7Inches (105.92 cm)
Width: 21.3 Inches (54.1 cm)
Depth: .1 Inches (.25 cm)
Weight: 5.8 lbs (2.64 kg)
The Go Power! Solar Flex panels are aerodynamic and DURABLE - a virtually unbreakable solar battery charger for RVs, boats and long-haul trucks. These solar panels are designed to provide a powerful charging solution for batteries and conform to almost any surface. Unlike other "flexible" products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flexible panel on the market.
An impermeable lamination coats the entire module, allowing it to contour and flex against curved areas, eliminating any need for custom mounts. The panel can be affixed by adhesive or screw mounting options and grommets are an added bonus for ease-of-installation. The thin, lightweight module can also be sewn into canvas, making it a truly versatile solar module.

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

Includes:

1 - 13.5 VDC illuminated switch
1 - switch plate labeled 'Gate Valve Heater'
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum 

Model:PNH:16-Deluxe-FPK
22' Heavy Duty Telescoping Fiberglass Flagpole
Height Closed: 48 inches (121.92 cm)
Diameter: 1.5 inches (3.81 cm)
Weight: 3.35 pounds (1.52 kg)

Model:PNH:22-Deluxe-FPK
22' Heavy Duty Telescoping Fiberglass Flagpole
Height Closed: 48 inches (121.92 cm)
Diameter: 2 inches (5.08 cm)
Weight: 3.35 pounds (1.52 kg)

Includes:

5- 120VAC illuminated switches

1 -  switch plate with raised mounting bezel, Labeled Fresh, Gray & Black

15 - quick slide female connectors,

4 - mounting plate screws

2 - blanks (to cover switch cutouts if all 5 switches are not used)

Each switch is rated for 20 Amps

Polished Nickel Finish.

1 1/4 inch pipe

Material: Brass

Less Overflow

Chome Finish.

1 1/4 inch pipe

Deck Plate: 66mm

Cover Diameter: 62mm

Material: Brass

Less Overflow

Pricing is for a Carton of 22 Sheets

Sold in Carton quantities only

Sheet size is 12.01 x 12.01 inches

Pattern tiles is 2 x 1 inch

Overall thickness is 1/8 inch

Polished Nickel Finish.

With Push Rod.

1 1/4 inch pipe

Deck Plate: 66mm

Material: Brass

Less Overflow

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing.

cUPC certified

Ceramic Cartridge

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing.

cUPC certified

Ceramic Cartridge

Modern Single Lever Design

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing, exceeding the industry durability standard.

cUPC certified

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass construction

Square Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Brass Cartridge

Easy to install

90° swiveling spout

For either cold or hot water, Red/Blue indicators included

This wire is the same wire used by the RV Manufactures in 12 Volt DC circuits.

This is the wire we recommend, its colors match the UltraHeat power leads for ease in wiring connections,  and also meets the minimum gauge wire requirements when used with the UltraHeat switch kits.  

This wire is the same wire used by the RV Manufactures in 12 Volt DC circuits.

This is the wire we recommend, its colors match the UltraHeat power leads for ease in wiring connections,  and also meets the minimum gauge wire requirements when used with the UltraHeat switch kits. 

GP-1000
Modified Sine Wave Inverter
1000 Watts -12 volt
Length: 13.5 Inches (34.29 cm)
Width: 12 Inches (30.48 cm)
Height: 3.5 Inches (8.89 cm)
Weight: 4.2 lbs (1.91 kg)
Go Power! 1000-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 1000-Watt of continuous power. This inverter comes with two AC outlets and can be hooked up to the batteries using GP-DC-KIT2 and can surge to 1300-Watt as well as contains all instructions.

To be wired in parallel with other relay coils within the Master Control Circuit  

Coil - 12VDC

Contacts - 30A @ 120/277 VAC

                    20A @ 28 VDC (low voltage)

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Includes:

5- 13.5VDC illuminated switches,
1 - labeled (Fresh, Gray, Black) 5 gang switch plate with raised mounting bezel
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1- 120 VAC illuminated switch
2 - Labeled switch plates
(1-Tank, 1-Pipe/Elbow)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2  -mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum