Search results for: 'pad, heat, for metal tank'

Model: AN:324500
4" x 6" Empire Brand Flags
Height: 4 inches (10.16 cm)
Length: 6 inches (15.24 cm)
Weight:pound (2.27 kg)
Show your support for those who have served our country by decorating your desk or home with this Miniature Armed Forces Flag set. Centered around the American flag are the flags of each branch of the armed forces: Army, Navy, U.S. Marine Corps, Air Force, and U.S. Coast Guard. Over a period of years the Armed Forces of the United States were organized, but no attention was given to the colors (flags) that would represent those forces. Following the Second World War more and more occasions arose when it was desirable to have a color guard with a color for each of the five official services. These flags are now widely used in the private sector as well. Families with men or women serving in the military and others who want to express their support for the military often fly commercially made replicas of the flags. The actual colors used by the services are typically embroidered and decorated with cords and tassels, spearheads, fringe, and battle streamers

For Standard RV Holding Tanks up to 75 Gal. ( 284 Liters)

120VAC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw:1.68 Amps
Wattage: 201.6 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV  holding tanks up to 55 Gallon (208.2 Liters)

120 VAC
Size:12" X 20" (30.5cm x 51cm)
Amperage Draw:1.37 Amps
Wattage: 164.4 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

Model: Annin Nyl-Glo US Air Force Retired AN:977617
3' x 4' US Air Force Retired Nylon Flag
Height: 3 feet (91.44 cm)
Length: 4 feet (121.9 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 4 feet US Air Force Retired flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Model: Annin Nyl-Glo US Air Force AN:439010
3' x 5' US Air Force Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 5 feet US Air Force flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

For Standard RV holding tanks up to 40 Gal. (151 Liters)

13.5VDC & 120VAC (Dual Voltage, Dual Element)
Size:12" x 24" (30.5cm x 61cm)

Amperage Draw - Low voltage side: 9.0 Amps @ 13.5 VDC
Wattage: 121.5 watts
Amperage Draw - High voltage side: 0.94 Amps @ 120 VAC
Wattage: 112.8watts

120 VAC power cord is 15' (4.5M) long

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks  up to 75 Gal. ( 284 Liters)
13.5VDC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw: 11.8 Amps
Wattage: 159.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 55 Gal. (208.2 Liters)
13.5VDC
Size:12" x 20" (30.5cm x 50.8cm)
Amperage Draw: 9.9 Amps
Wattage: 133.7 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to  25 Gal. (95L)
13.5VDC
Size: 7 1/4" x 12" (18.4cm x 30.5cm)
Amperage Draw: 4.1 Amps)
Wattage: 55.35 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC
Length: 12" (30.5cm),
Amperage Draw: 2.3 Amps

To be used only with a ridge half inch supply line (PEX style). Do not use on a vinyl or vinyl reinforced supply line, this type of supply line will not accept the heat output.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter (7.6cm) RV drain pipe

Heater Length: 18" (45.7cm),

13.5VDC

Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

 

For a 3" diameter (7.6cm) RV drain pipe
Length: 12" (30.5cm)

13.5VDC
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

Length: 18" (45.7cm)

13.5VDC
Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

13.5VDC
Length: 12" (30.5cm),
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter  (7.6cm) RV drain pipe

13.5VDC
Size: 13" x 3"  (33 x 7.6 cm)
Amperage Draw: 1.8 Amps
Wattage: 24.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter  (3.8 cm) RV drain pipe

13.5VDC
Size: 8" x 3" (20.3 x 7.6 cm)
Amperage Draw: 0.9 Amps
Wattage: 12.15 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Pricing is for a Carton of 22 Sheets

Sold in Carton quantities only

Sheet size is 12.01 x 12.01 inches

Pattern tiles is 2 x 1 inch

Overall thickness is 1/8 inch

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 1.5" diameter  (3.8cm) pipe gate valve

13.5 VDC,
 2.5 Amp Draw.
Wattage: 33.8 watts

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself. 

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 1.5 LFT (0.45M)

Maximum of 1.5 Amps of total draw at full length

 

 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 3.2LFT (1 M)

Maximum of 3 Amps of total draw at full length

 

 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 6.5LFT (1.98M)

Maximum of 6 Amps of total draw at full length

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1 - 13.5 VDC illuminated switch
1 - switch plate labeled 'Gate Valve Heater'
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum 

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.