Search results for: 'Heat Pad for Victron 12V 300Ah Smart - 12W each side'

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 1.5 LFT (0.45M)

Maximum of 1.5 Amps of total draw at full length

 

 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 3.2LFT (1 M)

Maximum of 3 Amps of total draw at full length

 

 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC

Standard length of 6.5LFT (1.98M)

Maximum of 6 Amps of total draw at full length

Model: AN:324500
4" x 6" Empire Brand Flags
Height: 4 inches (10.16 cm)
Length: 6 inches (15.24 cm)
Weight:pound (2.27 kg)
Show your support for those who have served our country by decorating your desk or home with this Miniature Armed Forces Flag set. Centered around the American flag are the flags of each branch of the armed forces: Army, Navy, U.S. Marine Corps, Air Force, and U.S. Coast Guard. Over a period of years the Armed Forces of the United States were organized, but no attention was given to the colors (flags) that would represent those forces. Following the Second World War more and more occasions arose when it was desirable to have a color guard with a color for each of the five official services. These flags are now widely used in the private sector as well. Families with men or women serving in the military and others who want to express their support for the military often fly commercially made replicas of the flags. The actual colors used by the services are typically embroidered and decorated with cords and tassels, spearheads, fringe, and battle streamers

Model: Annin Nyl-Glo US Air Force Retired AN:977617
3' x 4' US Air Force Retired Nylon Flag
Height: 3 feet (91.44 cm)
Length: 4 feet (121.9 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 4 feet US Air Force Retired flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Model: Annin Nyl-Glo US Air Force AN:439010
3' x 5' US Air Force Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 5 feet US Air Force flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Pack of Four (4) - LED  Oblong Style Side Marker Amber Light with Chrome Bezel

Voltage:    10-30VDC

Measurements:   3.6 x 1.26 x 0.77 Inches

4 SMD LEDS

Waterproof, Dust-proof PC Lens

Surface Mount 

Pack of Four (4) - LED Hexagon Style Side Marker Amber Light with Chrome Bezel

Voltage:    10-30VDC

Measurements:   3.2 x 1.77 x 0.79 Inches

2 SMD LEDS

Waterproof, Dust-proof PC Lens

Surface Mount 

For Standard RV holding tanks up to 40 Gal. (151 Liters)

13.5VDC & 120VAC (Dual Voltage, Dual Element)
Size:12" x 24" (30.5cm x 61cm)

Amperage Draw - Low voltage side: 9.0 Amps @ 13.5 VDC
Wattage: 121.5 watts
Amperage Draw - High voltage side: 0.94 Amps @ 120 VAC
Wattage: 112.8watts

120 VAC power cord is 15' (4.5M) long

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 1.5" diameter  (3.8cm) pipe gate valve

13.5 VDC,
 2.5 Amp Draw.
Wattage: 33.8 watts

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself. 

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC
Length: 12" (30.5cm),
Amperage Draw: 2.3 Amps

To be used only with a ridge half inch supply line (PEX style). Do not use on a vinyl or vinyl reinforced supply line, this type of supply line will not accept the heat output.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter (7.6cm) RV drain pipe

Heater Length: 18" (45.7cm),

13.5VDC

Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

 

For a 3" diameter (7.6cm) RV drain pipe
Length: 12" (30.5cm)

13.5VDC
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

Length: 18" (45.7cm)

13.5VDC
Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

13.5VDC
Length: 12" (30.5cm),
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter  (7.6cm) RV drain pipe

13.5VDC
Size: 13" x 3"  (33 x 7.6 cm)
Amperage Draw: 1.8 Amps
Wattage: 24.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter  (3.8 cm) RV drain pipe

13.5VDC
Size: 8" x 3" (20.3 x 7.6 cm)
Amperage Draw: 0.9 Amps
Wattage: 12.15 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV Holding Tanks up to 75 Gal. ( 284 Liters)

120VAC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw:1.68 Amps
Wattage: 201.6 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV  holding tanks up to 55 Gallon (208.2 Liters)

120 VAC
Size:12" X 20" (30.5cm x 51cm)
Amperage Draw:1.37 Amps
Wattage: 164.4 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks  up to 75 Gal. ( 284 Liters)
13.5VDC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw: 11.8 Amps
Wattage: 159.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 55 Gal. (208.2 Liters)
13.5VDC
Size:12" x 20" (30.5cm x 50.8cm)
Amperage Draw: 9.9 Amps
Wattage: 133.7 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to  25 Gal. (95L)
13.5VDC
Size: 7 1/4" x 12" (18.4cm x 30.5cm)
Amperage Draw: 4.1 Amps)
Wattage: 55.35 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

To be wired in parallel with other relay coils within the Master Control Circuit  

Coil - 12VDC

Contacts - 30A @ 120/277 VAC

                    20A @ 28 VDC (low voltage)

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Designed to be used as a master control system with conjunction with UltraHeat® heat panels and anti-freezing systems.

Sensor electronically monitors the outside ambient temperature, activates the system when temperatures fall to 35°F (1.6°C), shuts down the system when temperatures rise to 45°F (7.2°C)

Electronic Sensor operates on 13.5 VDC. Relay coil is 13.5 VDC, Relay Contacts within are either AC or DC rated at 30A @120/277 VAC or 20A @ 28 VDC

DPST means Double Pole, Single Throw indicating basically two independent contact switches either 'on' or 'off' in unison with in the relay.

This Offer is for a Package of Four (4) Lights

Low Profile,  11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile, 11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K,  Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: Annin Nyl-Glo We Support Our Troops AN:929037
3' x 5' We Support Our Troops Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 12.8 ounces (.363 kg)
Nylon-Glo we support our troops flag. May They Return Soon flag with yellow ribbon. This yellow ribbon is a traditional symbol of support for those service men and women who serve our country in foreign lands, and this bright Nylon-Glo flag will proudly display your support until the day that they return home.Made in the USA.

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.