Search results for: 'pull outs 1 w 721 k bp'[0]'

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

This Offer is for a Package of Four (4) Lights

Low Profile, 11-18 VDC,  3 Watt Light Fixture

Total of 24 SMD LEDs 

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

This Offer is for a Package of Four (4) Lights

Low Profile,  11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

To be wired in parallel with other relay coils within the Master Control Circuit  

Coil - 12VDC

Contacts - 30A @ 120/277 VAC

                    20A @ 28 VDC (low voltage)

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 1.5" diameter  (3.8cm) pipe gate valve

13.5 VDC,
 2.5 Amp Draw.
Wattage: 33.8 watts

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself. 

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Brass Cartridge

Easy to install

90° swiveling spout

For either cold or hot water, Red/Blue indicators included

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Pricing is for a Carton of 22 Sheets

Sold in Carton quantities only

Sheet size is 12.01 x 12.01 inches

Pattern tiles is 2 x 1 inch

Overall thickness is 1/8 inch

Polished Nickel Finish.

1 1/4 inch pipe

Material: Brass

Less Overflow

Chome Finish.

1 1/4 inch pipe

Deck Plate: 66mm

Cover Diameter: 62mm

Material: Brass

Less Overflow

Polished Nickel Finish.

With Push Rod.

1 1/4 inch pipe

Deck Plate: 66mm

Material: Brass

Less Overflow

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing.

cUPC certified

Ceramic Cartridge

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing.

cUPC certified

Ceramic Cartridge

Modern Single Lever Design

Solid,  low lead brass construction for durability and reliability

This premium finish resists corrosion and tarnishing, exceeding the industry durability standard.

cUPC certified

Includes:

5- 13.5VDC illuminated switches,
1 - labeled (Fresh, Gray, Black) 5 gang switch plate with raised mounting bezel
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum

Model: AN:Mexico
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:Indiana
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:California
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: Texas A&M Aggies AN:2758
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Tennessee Volunteers AN:2757
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: North Carolina Tar Heels AN:2746
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Indiana Hoosiers AN:2731
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.