Search results for: 'switches and wiring'

Low Profile 11-18 VDC, 3 Watt Light Fixture

Total of 24 SMD LEDs

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile, 11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K,  Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Polished Nickel Finish.

1 1/4 inch pipe

Material: Brass

Less Overflow

Chome Finish.

1 1/4 inch pipe

Deck Plate: 66mm

Cover Diameter: 62mm

Material: Brass

Less Overflow

Polished Nickel Finish.

With Push Rod.

1 1/4 inch pipe

Deck Plate: 66mm

Material: Brass

Less Overflow

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass construction

Square Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

White Porcelain Lavatory Sink, Size: 12.2 x 4.1 Inches (310 * 105mm), Surface Mount, cUPC.

Model:GP-SF-15
SUNfilm 15 Watt Solar Panel
Length: 36 Inches (91.44 cm)
Width: 12.25 Inches (31.12 cm)
Depth: .5 Inches (1.27 cm)
Weight: 6.6 lbs (2.99 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 15 delivers up to 900mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model:GP-SF-1.5
SUNfilm 1.5 Watt Solar Panel
Length: 14.5 Inches (36.83 cm)
Width: 6.5 Inches (16.51 cm)
Depth: .5 Inches (1.27 cm)
Weight: 2 lbs (.91 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 1.5 delivers up to 120mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

GP-1000
Modified Sine Wave Inverter
1000 Watts -12 volt
Length: 13.5 Inches (34.29 cm)
Width: 12 Inches (30.48 cm)
Height: 3.5 Inches (8.89 cm)
Weight: 4.2 lbs (1.91 kg)
Go Power! 1000-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 1000-Watt of continuous power. This inverter comes with two AC outlets and can be hooked up to the batteries using GP-DC-KIT2 and can surge to 1300-Watt as well as contains all instructions.

This sink features a simple yet elegant design that can complement any bathroom.

Made from high-quality material, this sink is built to last and withstand everyday wear and tear.

White Porcelain Apron Front Lavatory Sink, 16.1 * 16.1 * 5.9 Inches, 25.6 lbs., Surface Mount, cUPC.

White Porcelain, 17.1 * 17.1 * 5.5 Inches, 8.6 lbs., cUPC.

White Ceramic, 12.8 * 12.8 * 5.3 Inches, 8.3 lbs., cUPC.

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

GP-300
Modified Sine Wave Inverter
300 Watts -12 volt
Length: 9.5 Inches (24.13 cm)
Width: 8.5 Inches (21.59 cm)
Height: 1.8 Inches (4.57 cm)
Weight: 1.8 lbs (.82 kg)
Go Power! 300-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 300-Watt of continues AC power. This inverter comes with two outlets and can be hooked up to the battery through the car utility adapter / cigarette lighter adapter. It can surge to 400-Watt as well as contains all instructions.

Model: Jolly Roger AN:379375
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
100% Heavyweight SolarGuard Nylon. Features strong duck heading and two large brass grommets. Durable and fast drying.3/4

Model: AN:153500
4" x 6" Empire Brand Flags
Height: 4 inches (10.16 cm)
Length: 6 inches (15.24 cm)
Weight: 1 pound (2.27 kg)

The Flags of the 50 States set is a complete set of 4" x 6" Rayon flags that are mounted to 10" black plastic poles with gold colored gilt spears. These miniature replica flags are made to the highest quality available and it shows in their rich and vibrant colors. This set makes a great addition to any classroom, boardroom, office or home. Flags are shown mounted on an elegant black wooden base - sold separately.

Model: Annin Nyl-Glo Welcome Home Our Heroes AN:439200
3' x 5' USA Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 12.8 ounces (.363 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 5 feet Welcome Home Our Heroes flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Model: Annin Nyl-Glo We Support Our Troops AN:929037
3' x 5' We Support Our Troops Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 12.8 ounces (.363 kg)
Nylon-Glo we support our troops flag. May They Return Soon flag with yellow ribbon. This yellow ribbon is a traditional symbol of support for those service men and women who serve our country in foreign lands, and this bright Nylon-Glo flag will proudly display your support until the day that they return home.Made in the USA.

Model: Annin Nyl-Glo US Air Force Retired AN:977617
3' x 4' US Air Force Retired Nylon Flag
Height: 3 feet (91.44 cm)
Length: 4 feet (121.9 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 4 feet US Air Force Retired flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Model: Annin Nyl-Glo US Army Retired AN:975561
3' x 4' US Army Retired Flag
Height: 3 feet (91.44 cm)
Length: 4 feet (121.9 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 4 feet US Army Retired flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

Model: Annin Nyl-Glo US Marine Corps AN:439005
3' x 5' US Marine Corps Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 5 feet US Marine Corps flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.