Search results for: 'Heaters for batteries'[0]''

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model:GP-FLEX-200
200 Watt Flexible Solar Kit
Length: 41.7Inches (105.92 cm)
Width: 21.3 Inches (54.1 cm)
Depth: .1 Inches (.25 cm)
Weight: 5.8 lbs (2.64 kg)
The Go Power! Solar Flex panels are aerodynamic and DURABLE - a virtually unbreakable solar battery charger for RVs, boats and long-haul trucks. These solar panels are designed to provide a powerful charging solution for batteries and conform to almost any surface. Unlike other "flexible" products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flexible panel on the market.
An impermeable lamination coats the entire module, allowing it to contour and flex against curved areas, eliminating any need for custom mounts. The panel can be affixed by adhesive or screw mounting options and grommets are an added bonus for ease-of-installation. The thin, lightweight module can also be sewn into canvas, making it a truly versatile solar module.

GP-1000
Modified Sine Wave Inverter
1000 Watts -12 volt
Length: 13.5 Inches (34.29 cm)
Width: 12 Inches (30.48 cm)
Height: 3.5 Inches (8.89 cm)
Weight: 4.2 lbs (1.91 kg)
Go Power! 1000-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 1000-Watt of continuous power. This inverter comes with two AC outlets and can be hooked up to the batteries using GP-DC-KIT2 and can surge to 1300-Watt as well as contains all instructions.

Model: Annin Nyl-Glo We Support Our Troops AN:929037
3' x 5' We Support Our Troops Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 12.8 ounces (.363 kg)
Nylon-Glo we support our troops flag. May They Return Soon flag with yellow ribbon. This yellow ribbon is a traditional symbol of support for those service men and women who serve our country in foreign lands, and this bright Nylon-Glo flag will proudly display your support until the day that they return home.Made in the USA.

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Includes:

3- 13.5VDC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4  -mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1 - 13.5 VDC illuminated switch
1 - switch plate labeled 'Gate Valve Heater'
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum 

This Offer is for a Package of Four (4) Lights

Low Profile, 11-18 VDC,  3 Watt Light Fixture

Total of 24 SMD LEDs 

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

This Offer is for a Package of Four (4) Lights

Low Profile,  11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile 11-18 VDC, 3 Watt Light Fixture

Total of 24 SMD LEDs

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile, 11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K,  Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: BP:LT0126-06
Decorative Trim - Oceana Winchester Brass
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .28 Inch (.711 cm)
Weight: 3.6 lbs (1.63 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0137-06
Decorative Trim - Diamond Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .25 Inch (.635 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-06
Decorative Trim - Aurora Winchester Brass (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.