Search results for: 'Light up facet aeurator'

This Offer is for a Package of Four (4) Lights

Low Profile,  11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile, 11-18 VDC, 6 Watt Light Fixture

Total of 48 SMD Super Bright LEDs (24 per side)

Lower Power Consumption & High Energy Efficiency

Built in 3-way switch (to use one or both sides of light fixture).

100,000 hour life expectancy

White Plastic Exterior

11.22 x 5.0 x 1.5 Inches  (285 x 127 x 38mm)

Color Temperature: 6000K - 6500K,  Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Low Profile 11-18 VDC, 3 Watt Light Fixture

Total of 24 SMD LEDs

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

This Offer is for a Package of Four (4) Lights

Low Profile, 11-18 VDC,  3 Watt Light Fixture

Total of 24 SMD LEDs 

Lower Power Consumption & High Energy Efficiency

Built in on/off switch

100,000 hour life expectancy

White Plastic Exterior

8.18 x 5.0 x 1.5 Inches   (207.8 x 127 x 38mm)

Color Temperature: 6000K - 6500K, Day Light

Mounting screws and wire nuts included

One Year Warranty GUARANTEE

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Pack of Four (4) - LED  Oblong Style Side Marker Amber Light with Chrome Bezel

Voltage:    10-30VDC

Measurements:   3.6 x 1.26 x 0.77 Inches

4 SMD LEDS

Waterproof, Dust-proof PC Lens

Surface Mount 

Pack of Four (4) - LED Hexagon Style Side Marker Amber Light with Chrome Bezel

Voltage:    10-30VDC

Measurements:   3.2 x 1.77 x 0.79 Inches

2 SMD LEDS

Waterproof, Dust-proof PC Lens

Surface Mount 

Kit includes:

3 foot of 8 gauge positive power lead with connection terminal.

Assortment of standard auto blade fuses

Cover and label assortment

4 mounting wood screws

Kit includes:

3 foot of 8 gauge positive power lead with connection terminal.

Assortment of standard auto blade fuses

Cover and label assortment

4 mounting wood screws 

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

White Porcelain Apron Front Lavatory Sink, 16.1 * 16.1 * 5.9 Inches, 25.6 lbs., Surface Mount, cUPC.

White Porcelain, 17.1 * 17.1 * 5.5 Inches, 8.6 lbs., cUPC.

White Ceramic, 12.8 * 12.8 * 5.3 Inches, 8.3 lbs., cUPC.

All metal construction for durability

Concealed screw installation

Mounting hardware included

Superior mounting posts

Pfister Pforever Warranty® covers finish and function for life

Holds up to 10 lbs

Coordinating Pasadena family bath products available

Concealed screw design allows for a clean look when installed

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

UltraHeat 13.5 VDC Replacement Lighted Switches.

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

13.5 VDC Built-in LED for 'ON' Indicator.

Pricing is for a Carton of 22 Sheets

Sold in Carton quantities only

Sheet size is 12.01 x 12.01 inches

Pattern tiles is 2 x 1 inch

Overall thickness is 1/8 inch

Model:GP-SF-15
SUNfilm 15 Watt Solar Panel
Length: 36 Inches (91.44 cm)
Width: 12.25 Inches (31.12 cm)
Depth: .5 Inches (1.27 cm)
Weight: 6.6 lbs (2.99 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 15 delivers up to 900mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model:GP-SF-1.5
SUNfilm 1.5 Watt Solar Panel
Length: 14.5 Inches (36.83 cm)
Width: 6.5 Inches (16.51 cm)
Depth: .5 Inches (1.27 cm)
Weight: 2 lbs (.91 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 1.5 delivers up to 120mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model:GP-FLEX-200
200 Watt Flexible Solar Kit
Length: 41.7Inches (105.92 cm)
Width: 21.3 Inches (54.1 cm)
Depth: .1 Inches (.25 cm)
Weight: 5.8 lbs (2.64 kg)
The Go Power! Solar Flex panels are aerodynamic and DURABLE - a virtually unbreakable solar battery charger for RVs, boats and long-haul trucks. These solar panels are designed to provide a powerful charging solution for batteries and conform to almost any surface. Unlike other "flexible" products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flexible panel on the market.
An impermeable lamination coats the entire module, allowing it to contour and flex against curved areas, eliminating any need for custom mounts. The panel can be affixed by adhesive or screw mounting options and grommets are an added bonus for ease-of-installation. The thin, lightweight module can also be sewn into canvas, making it a truly versatile solar module.

Model: GP-PSK-120
120 Watt Portable Folding Solar Kit
Length: 32.5 Inches (82.55 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.8 Inches(7.11 cm)
Weight: 28.7 lbs (13.02 kg)
The Go Power! portable 120 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 120 Watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 120 Watts portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 120 Watts solar kit can be set up in minutes so it is easy to charge batteries.

Model: GP-PSK-80
80 Watt Portable Folding Solar Kit
Length: 21.6 Inches (54.86 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.4 Inches(6.10 cm)
Weight: 19 lbs (8.62 kg)
The Go Power! portable 80 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 80 watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 80 Watt portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 80 Watts solar kit can be set up in minutes so it is easy to charge batteries.

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

GP-300
Modified Sine Wave Inverter
300 Watts -12 volt
Length: 9.5 Inches (24.13 cm)
Width: 8.5 Inches (21.59 cm)
Height: 1.8 Inches (4.57 cm)
Weight: 1.8 lbs (.82 kg)
Go Power! 300-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 300-Watt of continues AC power. This inverter comes with two outlets and can be hooked up to the battery through the car utility adapter / cigarette lighter adapter. It can surge to 400-Watt as well as contains all instructions.

GP-175
Modified Sine Wave Inverter
175 Watts -12 volt
Length: 8.1 Inches (20.57 cm)
Width: 7.2 Inches (18.29 cm)
Height: 2.1 Inches (5.33 cm)
Weight: 1.11 lbs (.50 kg)
Go Power! 175-Watt Modified Sine Wave Inverter takes in 12 volt DC power and converts it to AC household power to run loads up to 175 watts of continuous AC power. The GP-175 can connect to the car utility adaptor / cigarette lighter adaptor for DC power and plug in AC device to the one AC outlet on the GP-175. The GP-175 can surge to 210 watts and all instructions is provided.

When you need replacement switches

Includes 3 Lighted switches.

Switches are rated a 20 Amps Max.

120 VAC Built-in LED for 'ON' Indicator