Search results for: 'UltraHeat 50 ft of heavy duty 12 guage straded bonded two part wire, red and white'

Model: GP-PSK-120
120 Watt Portable Folding Solar Kit
Length: 32.5 Inches (82.55 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.8 Inches(7.11 cm)
Weight: 28.7 lbs (13.02 kg)
The Go Power! portable 120 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 120 Watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 120 Watts portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 120 Watts solar kit can be set up in minutes so it is easy to charge batteries.

White Porcelain Rectangular Under Mount Sink, 16 * 14 * 6.8 Inches, 17.1 lbs., cUPC.

White Porcelain Apron Front Lavatory Sink, 16.1 * 16.1 * 5.9 Inches, 25.6 lbs., Surface Mount, cUPC.

White Porcelain, 17.1 * 17.1 * 5.5 Inches, 8.6 lbs., cUPC.

White Ceramic, 12.8 * 12.8 * 5.3 Inches, 8.3 lbs., cUPC.

White Porcelain Lavatory Sink, Size: 12.2 x 4.1 Inches (310 * 105mm), Surface Mount, cUPC.

Model: SA:TNM114RW
Summit Professional Series
20" Wide Slide-in Gas Range
Height: 36 inches
Width: 20 inches
Depth: 24 inches
4 Sealed 9000 BTU Burners
Slide-in Look w/ Flat Backguard
Electronic Ignition
Large 2.5 cu. ft. Oven w/ Glass Door and Interior LIght
Black Door Front, Cabinet and Kickplate
Stainless Steel Handles
Black Porcelain Cooktop w/ Stainless Steel Manifold
Lower Drop Down Broiler Compartment
RVIA & CSA Certified
Made in America

Model: SA:TNM630277BFKWY
Summit Professional Series
24" Wide Slide-in Gas Range
Height: 44 inches
Width: 24 inches
Depth: 24 inches
4 Sealed 9000 BTU Burners
Slide-in Look w/ Stainless Steel Backguard w/ Digital Clock and Timer
Electronic Ignition
Large 2.92 cu. ft. Oven w/ Glass Door and Interior LIght
Stainless Steel Door Fronts and Kickplate
Black Cabinet
Professional Curved Towel Bar Style Handles
Black Porcelain Cooktop w/ Stainless Steel Manifold
Lower Drop Down Broiler Compartment
RVIA & CSA Certified
Made in America

Weekender SW
Complete Solar & Inverter Charging Kit
160 Watts Solar Charging Kit
1500 Watts Pure Sine Wave Inverter
Length: 64 Inches (162.56 cm)
Width: 31Inches (78.74 cm)
Height: 18 Inches (45.72 cm)
Weight: 60 lbs (27.22 kg)
The Weekender SW kit is designed for anyone that would like the benefit of solar power to charge their batteries, and the ability to use AC appliances when there is no utility power available. For example you can run a microwave, TV, blender, audio sound equipment, computers and more. The Weekender kit contains a 160 Watt solar charging kit and a 1500 Watt pure sine wave inverter system. The Weekender includes everything you need to hook the solar and inverter system up to your batteries and install the solar panel on a flat surface. The Weekender is great for charging your RV, boat, cottage and cabin batteries, while providing you with AC power without the noise of a generator or the fuel and maintenance cost that goes with it. The kit is excellent for weekend and long weekend trips, and is expandable by adding up to two GP-RV-160E expansion kits (each sold separately). This allows you to take advantage of available sunlight for faster charging and added capacity. Go Power! recommends at least a 200 amp hour battery bank for the Weekender SW kit.

Pricing is for a Carton of 22 Sheets

Sold in Carton quantities only

Sheet size is 12.01 x 12.01 inches

Pattern tiles is 2 x 1 inch

Overall thickness is 1/8 inch

Model: Jolly Roger AN:379375
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
100% Heavyweight SolarGuard Nylon. Features strong duck heading and two large brass grommets. Durable and fast drying.3/4

Model: Annin Nyl-Glo Honor and Remember AN:1957
3' x 5' Honor and Remember Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 10.4 ounces (.295 kg)
Annin Flagmakers dyes its own Nyl-Glo Colorfast US Flags for a one year colorfast guarantee from the time of purchase.These 3 x 5 feet Honor and Remember flags are made of UV resistant nylon and are the longest lasting nylon flags available.Made in the USA.

GP-1000
Modified Sine Wave Inverter
1000 Watts -12 volt
Length: 13.5 Inches (34.29 cm)
Width: 12 Inches (30.48 cm)
Height: 3.5 Inches (8.89 cm)
Weight: 4.2 lbs (1.91 kg)
Go Power! 1000-Watt Modified Sine Wave Inverter takes in 12 Volt DC power and converts it to AC household power to run loads up to 1000-Watt of continuous power. This inverter comes with two AC outlets and can be hooked up to the batteries using GP-DC-KIT2 and can surge to 1300-Watt as well as contains all instructions.

Model: GP-PSK-80
80 Watt Portable Folding Solar Kit
Length: 21.6 Inches (54.86 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.4 Inches(6.10 cm)
Weight: 19 lbs (8.62 kg)
The Go Power! portable 80 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 80 watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 80 Watt portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 80 Watts solar kit can be set up in minutes so it is easy to charge batteries.

Model: BP:LT0125
Housing Channel Alignment Connectors - Linear
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0124
Housing Channel Alignment Connectors - 90 Degree Flat Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0123
Housing Channel Alignment Connectors - 90 Degree Interior/Exterior Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: AN:Mexico
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:Indiana
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:California
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Model: Annin Republic AN:001135
3' x 5' USA Polyester/Cotton Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4 ounces (.113 kg)
Republic U.S. flags combine the look and feel of cotton with light weight poyester in the economical blend.Finished with a canvas heading and brass grommets.Made in the USA.

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Transitional styling provides fluid, sleek lines that harmonize with a wide range of kitchen styles and makes simpler maintenance and cleaning.

High-arc spout design swivels 360 degree rotation offering greater clearance and access.

Single handle control, one hole drilling for less clutter and ease of operation.

Pull-down spray head operates in an aerated or spray mode thru a built-in toggle diverter.

Uses a ceramic cartridge and has a 3 year warranty.