Search results for: 'Light- 80" Strip Led 12"leads'

Model: BP:LT0106
Strip Connector Set - 90c Flat Corner
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: BP:LT0104
Strip Connector Set - Straight
Length: .375 Inches (.952 cm)
Width: .375 Inches (.952 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Wire and Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.

Model: GP-PSK-120
120 Watt Portable Folding Solar Kit
Length: 32.5 Inches (82.55 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.8 Inches(7.11 cm)
Weight: 28.7 lbs (13.02 kg)
The Go Power! portable 120 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 120 Watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 120 Watts portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 120 Watts solar kit can be set up in minutes so it is easy to charge batteries.

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

Model: AL:560-1000
12/24 Volt Universal 24 SMD LED Replacement Light
Length:1.75 Inches (4.44 cm)
Width: 1 Inch (2.54 cm)
Height: .188 Inch (.476 cm)
Weight: .05 lb (.023 kg)
Replace your old incandescent bulbs with this brighter, longer lasting 24 LED light.This replacement light comes with 6 connectors to fit almost any application.This light is constructed using driver technology (most others use resistors) which not only keeps your light cooler but also increases its lifespan to over 100,000 hours. Easy to install with the included 3M adhesive backing.Made in the USA.

Model: BP:LT0143
Light Controller
Length:4.5 Inches (11.43 cm)
Width: 2.875 Inches (7.30 cm)
Height: 1 Inch (2.54 cm)
Weight: .2 lb (.091kg)
SecuRemote is a device that when connected to your LIT (Light Integrated Trim) LED lighting allows you to power on/off or even dim your lights using your smart phone.The SecuRemote app works with all three major smartphone platforms including iPhone, Android and BlackBerry.SecuRemote uses unique technology to deliver powerful communication, authentication and functiionality to your LIT products and also home entry doors, garage doors and electronic gates.SecuRemote blends seamlessly into your lifestyle, bringing unprecedented convenience, control and security to you and your family.

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Model: BP:LT0145
Extended Diffuser (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0118
Functional Diffuser (4pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.08 Inches (2.74 cm)
Height: .64 Inch (1.62 cm)
Weight: 1.15 lbs (.522 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0121
Utility Housing (4 pcs)
Length:48 Inches Each (30.48 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: 1 lb (.454 kg)
This rectangular tube is designed to be used as a housing channel and light diffuser combination.Its inner pocket allows for the insertion of non-shielded LED strips that remain secure and protected.

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.

Model: BP:LT0122
Utility Housing End Caps (2 pcs)
Length: .5 Inches (1.27 cm)
Width: .5 Inch (1.27 cm)
Height: .75 Inch (1.90 cm)
Weight: .1 lb (.045 kg)
The end caps are used for both shielding the utility housing tube and surface mounting your custom length sections.

Model: SA:SCFF1537B
Summit Appliance
2.45 cu. ft. Built-in Frost Free Freezer
Black Door with Lock
Height: 34.0 inches
Width: 14.75 inches
Depth: 22.75 inches
Flexible Design for Built-in or FreestandingUse Under Counters
ENERGY STAR Qualified
Frost Free Freezer w/ Auto Defrost
Adjustable Slide-out Chrome Shelves
Counter Depth for an easy fit
Digital Thermostat in Kickplate
Interior Recessed LED Light
100% CFC Free
Interior Light

Model: GP-PSK-80
80 Watt Portable Folding Solar Kit
Length: 21.6 Inches (54.86 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.4 Inches(6.10 cm)
Weight: 19 lbs (8.62 kg)
The Go Power! portable 80 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 80 watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 80 Watt portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 80 Watts solar kit can be set up in minutes so it is easy to charge batteries.

Model: Annin Republic AN:001135
3' x 5' USA Polyester/Cotton Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4 ounces (.113 kg)
Republic U.S. flags combine the look and feel of cotton with light weight poyester in the economical blend.Finished with a canvas heading and brass grommets.Made in the USA.

Model: BP:LT0125
Housing Channel Alignment Connectors - Linear
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0124
Housing Channel Alignment Connectors - 90 Degree Flat Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model: BP:LT0123
Housing Channel Alignment Connectors - 90 Degree Interior/Exterior Corner
All Housing Channel Alignment Connectors are made of aluminum Strips that provide fine directional alignment when joining two Housing Channel sections.Available in three types of connections, 90c interior/exterior corner, 90c flat corner and linear.

Model:GP-SF-1.5
SUNfilm 1.5 Watt Solar Panel
Length: 14.5 Inches (36.83 cm)
Width: 6.5 Inches (16.51 cm)
Depth: .5 Inches (1.27 cm)
Weight: 2 lbs (.91 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 1.5 delivers up to 120mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model: Jolly Roger AN:379375
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
100% Heavyweight SolarGuard Nylon. Features strong duck heading and two large brass grommets. Durable and fast drying.3/4

Model: AN:Mexico
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:Indiana
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:California
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: Seattle Seahawks AN:1354
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: San Francisco 49ers AN:1352
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Pittsburg Steelers AN:1356
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: New York Giants AN:1380
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Indianapolis Colts AN:1366
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model:Green Bay Packers AN:1358
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Cleveland Browns AN:1377
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Baltimore Ravens AN:1371
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Wisconsin Badgers AN:2769
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: West Virginia Mountaineers AN:1434
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Texas A&M Aggies AN:2758
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Tennessee Volunteers AN:2757
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: South Carolina Gamecocks AN:1443
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.