Search results for: '13.5V VDC 1 AMP'

Model: BP:LT0128-SS
Decorative Trim - Aurora Stainless Steel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Model: BP:LT0128-14
Decorative Trim - Aurora Bright Nickel (8 pcs)
Length:12 Inches (30.48 cm)
Width: 1.10 Inches (2.79 cm)
Height: .22 Inch (.559 cm)
Weight: 2.4 lbs (1.09 kg)

Package of Eight Pieces

Elegant Metal Casting, Hand Buffed and Polished in Refined Bronze
Coordinates With Your Cabinetry, Furniture and Architectual Door Hardware
Snaps Easily and Securely Onto a Flat or Extended Diffuser
Can Be Cut to Size During Installation

Vessel Sink, Dimensions: 14.25 x 9.84 x 5.12 Inches (362 * 250 * 130mm), Smoke Inside with Matte Black Exterior, Tempered Glass, cUPC.

Model:GP-SF-1.5
SUNfilm 1.5 Watt Solar Panel
Length: 14.5 Inches (36.83 cm)
Width: 6.5 Inches (16.51 cm)
Depth: .5 Inches (1.27 cm)
Weight: 2 lbs (.91 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 1.5 delivers up to 120mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Stainless Steel & Brass construction

Square Base

Easily mounts to any wall surface

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Low Profile, 2.25" (5.7cm) extension from wall

Stainless Steel & Brass constuction

Round Base with Round Bar

Easily mounts to any wall surface

Model: BP:LT0111
Strip End Connector
Length:12 Inches (30.48 cm)
Weight: .05 lb (.023 kg)
Belwith/Keeler's strip wire end connector for the LIT (light integrated trim) dimmable LED lighting system. Use with the power supply unit (BP:LT0112) to connect to LED lighting sections or with the connecting wire (BP:LT0110) which is used to connect sections of LED lighting.

Model: SA:TNM630277BFKWY
Summit Professional Series
24" Wide Slide-in Gas Range
Height: 44 inches
Width: 24 inches
Depth: 24 inches
4 Sealed 9000 BTU Burners
Slide-in Look w/ Stainless Steel Backguard w/ Digital Clock and Timer
Electronic Ignition
Large 2.92 cu. ft. Oven w/ Glass Door and Interior LIght
Stainless Steel Door Fronts and Kickplate
Black Cabinet
Professional Curved Towel Bar Style Handles
Black Porcelain Cooktop w/ Stainless Steel Manifold
Lower Drop Down Broiler Compartment
RVIA & CSA Certified
Made in America

Model: SA:TNM114RW
Summit Professional Series
20" Wide Slide-in Gas Range
Height: 36 inches
Width: 20 inches
Depth: 24 inches
4 Sealed 9000 BTU Burners
Slide-in Look w/ Flat Backguard
Electronic Ignition
Large 2.5 cu. ft. Oven w/ Glass Door and Interior LIght
Black Door Front, Cabinet and Kickplate
Stainless Steel Handles
Black Porcelain Cooktop w/ Stainless Steel Manifold
Lower Drop Down Broiler Compartment
RVIA & CSA Certified
Made in America

Glass Vessel Sink, 12 x 12 x 4.5 Inches (305 * 305 * 114.3 mm), T12 Thickness, Silver Ring, cUPC.

This sink features a simple yet elegant design that can complement any bathroom.

Made from high-quality material, this sink is built to last and withstand everyday wear and tear.

White Porcelain Lavatory Sink, Size: 12.2 x 4.1 Inches (310 * 105mm), Surface Mount, cUPC.

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Ceramic Cartridge

Easy to install

90° swiveling spout

Includes 16 inch supply lines

Intergraded toggle button spray head

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Ceramic Cartridge

Easy to install

90° swiveling spout

Includes 16 inch supply lines

Intergraded toggle button spray head

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Ceramic Cartridge

Easy to install

90° swiveling spout

Includes 16 inch supply lines

Constructed of Low Lead solid Brass for durability

cUPC certified to meet both the American and Canadian Uniform Plumbing Codes

Ceramic Cartridge

Easy to install

90° swiveling spout

Includes 16 inch supply lines

Model:GP-SF-15
SUNfilm 15 Watt Solar Panel
Length: 36 Inches (91.44 cm)
Width: 12.25 Inches (31.12 cm)
Depth: .5 Inches (1.27 cm)
Weight: 6.6 lbs (2.99 kg)
Go Power!E SUNfilm Solar Battery Chargers are made from thin film technology that is lightweight and economical. The series is ideal for maintaining your batteryes charge during periods of inactivity, to protect against constant discharge from on-board computers, electronic systems and devices.. The SUNfilm 15 delivers up to 900mA of charge to your 12 Volt batteries which is perfect for trickle charging deep cycle & automotive batteries (12 volt), motorcycle, ATV, snowmobile and marine batteries as well as electronic device chargers (with the use of an adaptor.)

Model: GP-PSK-80
80 Watt Portable Folding Solar Kit
Length: 21.6 Inches (54.86 cm)
Width: 19.9 Inches (50.55 cm)
Depth: 2.4 Inches(6.10 cm)
Weight: 19 lbs (8.62 kg)
The Go Power! portable 80 Watts solar kit is the easiest and quickest way to charge 12 Volt batteries from the sun. This 80 watt portable kit has everything you will need to set up and charge your batteries to 100 percent full charge. The 80 Watt portable kit comes with a solar controller attached to the back of the panel and also includes the cables with battery clamps to easily connect to your batteries. The Go Power! portable 80 Watts solar kit can be set up in minutes so it is easy to charge batteries.

Model: BP:LT0120
Channel Cover (4 pcs)
Length: 48 Inches Each (121.92 cm)
Width: 1.17 Inches (2.97 cm)
Height: .47 Inch (1.19 cm)
Weight: 1 lb (.454 kg)
All housing, diffuser and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic).The Extended Diffuser and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination.The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.