Search results for: 'shower%252Bfaucet'

Designed to be used as a master control system with conjunction with UltraHeat® heat panels and anti-freezing systems.

Sensor electronically monitors the outside ambient temperature, activates the system when temperatures fall to 35°F (1.6°C), shuts down the system when temperatures rise to 45°F (7.2°C)

Electronic Sensor operates on 13.5 VDC. Relay coil is 13.5 VDC, Relay Contacts within are either AC or DC rated at 30A @120/277 VAC or 20A @ 28 VDC

DPST means Double Pole, Single Throw indicating basically two independent contact switches either 'on' or 'off' in unison with in the relay.

Includes:
3- 120 VAC illuminated switches
3-13.5VDC illuminated switches
1 - 5 gang switch plate with raised mounting bezel, labeled (Fresh, Gray, Black)
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum, indifferent to voltage rating.

Includes:

5- 120VAC illuminated switches

1 -  switch plate with raised mounting bezel, Labeled Fresh, Gray & Black

15 - quick slide female connectors,

4 - mounting plate screws

2 - blanks (to cover switch cutouts if all 5 switches are not used)

Each switch is rated for 20 Amps

Includes:

5- 13.5VDC illuminated switches,
1 - labeled (Fresh, Gray, Black) 5 gang switch plate with raised mounting bezel
15 - quick slide female connectors,
4 - mounting plate screws
2 - blanks (to cover switchcutouts if all 5 switches are not used)

Each switch is rated for 20 Amps maximum

Includes:

3- 120 VAC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4 - mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

3- 13.5VDC illuminated switches

1 - labeled switch platewith raised mounting bezel
9 - quick slide female connectors,
4  -mounting plate screws

Each switch is rated for 20 Amps maximum.

Includes:

1- 120 VAC illuminated switch
2 - Labeled switch plates
(1-Tank, 1-Pipe/Elbow)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2  -mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
2 - Labeled switch plates
(1-Tank Heater, 1-Pipe/Elbow Heater)
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum

Includes:

1 - 13.5 VDC illuminated switch
1 - switch plate labeled 'Gate Valve Heater'
1 - Raised Mounting Bezel
3 - quick slide female connectors,
2 - mounting plate screws

Switch is rated for 20 Amps maximum 

For a 1/2" diameter  (1.3cm) fresh water supply line

13.5 VDC
Length: 12" (30.5cm),
Amperage Draw: 2.3 Amps

To be used only with a ridge half inch supply line (PEX style). Do not use on a vinyl or vinyl reinforced supply line, this type of supply line will not accept the heat output.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter (7.6cm) RV drain pipe

Heater Length: 18" (45.7cm),

13.5VDC

Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

 

For a 3" diameter (7.6cm) RV drain pipe
Length: 12" (30.5cm)

13.5VDC
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

Length: 18" (45.7cm)

13.5VDC
Amperage Draw: 6.6 Amps
Wattage: 89.1 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter (3.8cm) RV drain pipe

13.5VDC
Length: 12" (30.5cm),
Amperage Draw: 4.1 Amps
Wattage: 55.4 watts

LIFETIME Limited Warranty

Made in the USA

For Standard RV Holding Tanks up to 75 Gal. ( 284 Liters)

120VAC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw:1.68 Amps
Wattage: 201.6 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV  holding tanks up to 55 Gallon (208.2 Liters)

120 VAC
Size:12" X 20" (30.5cm x 51cm)
Amperage Draw:1.37 Amps
Wattage: 164.4 watts

Easy Peel and Stick Installation

NOTE: 120 Volt AC power cord tank heaters cannot protect tanks from freezing while traveling. To make sure you have selected the correct tank heater for your needs, please read "How to Select Tank Heaters."

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 40 Gal. (151 Liters)

13.5VDC & 120VAC (Dual Voltage, Dual Element)
Size:12" x 24" (30.5cm x 61cm)

Amperage Draw - Low voltage side: 9.0 Amps @ 13.5 VDC
Wattage: 121.5 watts
Amperage Draw - High voltage side: 0.94 Amps @ 120 VAC
Wattage: 112.8watts

120 VAC power cord is 15' (4.5M) long

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks  up to 75 Gal. ( 284 Liters)
13.5VDC
Size:12" x 24" (30.5cm x 61cm)
Amperage Draw: 11.8 Amps
Wattage: 159.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to 55 Gal. (208.2 Liters)
13.5VDC
Size:12" x 20" (30.5cm x 50.8cm)
Amperage Draw: 9.9 Amps
Wattage: 133.7 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For Standard RV holding tanks up to  25 Gal. (95L)
13.5VDC
Size: 7 1/4" x 12" (18.4cm x 30.5cm)
Amperage Draw: 4.1 Amps)
Wattage: 55.35 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 3in diameter (7.62cm) pipe gate valve

13.5 VDC,

3 Amp Draw

Wattage: 40.5 watts.

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself.

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Heat Panel for a 1.5" diameter  (3.8cm) pipe gate valve

13.5 VDC,
 2.5 Amp Draw.
Wattage: 33.8 watts

Intended to work primarily with “Valterra” gate values (the most commonly used within the Industry), or similar models with a smooth and level flat surfaces on the exterior three sides of the gate body itself. 

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 3" diameter  (7.6cm) RV drain pipe

13.5VDC
Size: 13" x 3"  (33 x 7.6 cm)
Amperage Draw: 1.8 Amps
Wattage: 24.3 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

For a 1.5" diameter  (3.8 cm) RV drain pipe

13.5VDC
Size: 8" x 3" (20.3 x 7.6 cm)
Amperage Draw: 0.9 Amps
Wattage: 12.15 watts

Easy Peel and Stick Installation

LIFETIME Limited Warranty

Made in the USA

Model: Jolly Roger AN:379375
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
100% Heavyweight SolarGuard Nylon. Features strong duck heading and two large brass grommets. Durable and fast drying.3/4

Model: AN:601750-9F
9" Alluminum Eagle Flagpole Ornament
Height: 7.5 inches (19.05 cm)
Wingspan Width:9 inches (22.86 cm)
Depth: 4.5 inches (11.43 cm)
Weight: 1.25 (.57 kg)
This outdoor aluminum eagle flagpole ornament is ideal for flagpoles 20-35 feet in height.Made of tough aluminum casting with a durable gold finish for many years of enjoyment.

Model: AN:701300
Black Wooden Flag Base
Height: 7 inches (17.78 cm)
Length: 30 inches (76.2 cm)Weight: 4.75 pounds (2.15 kg)
Black wood base for 50 States. Will accommodate either 4 in. X 6 in. size or 8 in. X 12 in. size. Has a 51st hole for the U.S. Flag.

Model: AN:153500
4" x 6" Empire Brand Flags
Height: 4 inches (10.16 cm)
Length: 6 inches (15.24 cm)
Weight: 1 pound (2.27 kg)

The Flags of the 50 States set is a complete set of 4" x 6" Rayon flags that are mounted to 10" black plastic poles with gold colored gilt spears. These miniature replica flags are made to the highest quality available and it shows in their rich and vibrant colors. This set makes a great addition to any classroom, boardroom, office or home. Flags are shown mounted on an elegant black wooden base - sold separately.

Model: AN:324500
4" x 6" Empire Brand Flags
Height: 4 inches (10.16 cm)
Length: 6 inches (15.24 cm)
Weight:pound (2.27 kg)
Show your support for those who have served our country by decorating your desk or home with this Miniature Armed Forces Flag set. Centered around the American flag are the flags of each branch of the armed forces: Army, Navy, U.S. Marine Corps, Air Force, and U.S. Coast Guard. Over a period of years the Armed Forces of the United States were organized, but no attention was given to the colors (flags) that would represent those forces. Following the Second World War more and more occasions arose when it was desirable to have a color guard with a color for each of the five official services. These flags are now widely used in the private sector as well. Families with men or women serving in the military and others who want to express their support for the military often fly commercially made replicas of the flags. The actual colors used by the services are typically embroidered and decorated with cords and tassels, spearheads, fringe, and battle streamers

Model: AN:2472
Large Solar Light For Flagpoles
Height: 2 inches (5.08 cm)
Diameter: 10.25 inches (26.04cm)
Weight: 1.25 pounds (.57 kg)

Model: AN:Mexico
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:Indiana
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: AN:California
3' x 5'Nyl-Glo Nylon Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
"These outdoor state flags are finished with strong duck heading and solid number 2 sized brass grommets.
Annin state flags are not surface printed. Annin state flags are made with Annines Anco-Dye acid- dye process so that the bright vivid colors penetrate to the core of the SolarMaxA nylon fabric.
The SolarMaxA fabric is 100% manufactured in the United States and treated with UV inhibiting chemicals to help prevent Annin state flags from deteriorating in harsh sunlight. Because they are manufactured from light-weight, fast -drying nylon, Annin state flags fly in the lightest breeze. Indoor state flags finished with flannel lined pole sleeves and gold fringe are also available from Annin Flagmakers"

Model: Seattle Seahawks AN:1354
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: San Francisco 49ers AN:1352
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.

Model: Pittsburg Steelers AN:1356
3' x 5'Polyester Flag
Height: 3 feet (91.44 cm)
Length: 5 feet (152.4 cm)
Weight: 4.5 ounces (.128 kg)
These 3'x5' flags are made from polyester for the outdoors. Come complete with brass eye holes for hanging and is light weight.